How Often Should the Air Conditioner Be Tuned-Up?

Even if one doesn’t suspect any problems with the air conditioner, heating, and cooling, professionals recommend having it inspected, serviced, and cleaned once a year to ensure it operates at peak energy efficiency, so that it is ready to cool your home during the months when you need it the most. As your HVAC system runs, dust and dirt accumulate in vital areas that affect its efficiencies, like the condensing coils and air filters. If left unchecked, this buildup can cause your AC system to lose 5% of its operating efficiency each year, which means it can’t cool your house as effectively as it could if it was clean.

HVAC tune-up checklist items include:

  • Examine and clean the burners.
  • Examine filters.
  • Examine the carbon monoxide levels.
  • Examine the contractors and relays for wear.
  • Change the refrigerant levels.
  • Examine the pressure and temperature.
  • Examine the safety devices and controls.
  • Evaluate emergency shut-offs.
  • Examine the ductwork.
  • Cleaning of the drain line.
  • Examining the heat exchanger cracks.

Factors that may influence the AC tune-up cost:

  • Maintenance frequency.
  • Your home’s square footage.
  • The AC unit’s age.
  • The size of the ductwork.
  • Your AC’s model and complexity.

How often should one tune up the air conditioner?

  • Regardless of the type of HVAC, you should have an AC tune-up in Lewisville, TX, at least once a year. It is recommended that you tune up your air conditioner in the spring and your heating unit in the fall.

  • Having a skilled professional inspect the system before it gets too hot in spring will save you from waiting for an AC repair in the middle of summer. For the same reason, you should get a furnace tune-up before winter.

  • If anything needs to be repaired, you won’t be caught without a working heater in your home during a cold spell.

  • An hour is usually required to tune up an HVAC unit. But, the duration varies depending on the configuration of your unit. If the refrigerant is needed, tune up your unit for an additional 30 to 45 minutes.

  • You should take the best care of your heating and cooling system by having an AC tune-up in Lewisville, TX, by a professional HVAC company.

Why should you get an HVAC tune-up?

If we couldn’t back it up with solid reasoning, we couldn’t tell you to get an AC service in Lewisville, TX. Tune-ups can help you save money and extend the life of your air conditioner. If something is wrong with your HVAC system and it isn’t fixed during a tune-up, running it with a problem could cause additional damage and cost you more money in the long run. Catching problems during a tune-up can also help your system last longer because undiscovered issues don’t last as long – and tune-ups also ensure your HVAC system is running at peak efficiency.

Ashford Mechanical provides low-cost preventive maintenance service contracts that include cleaning and servicing your HVAC unit and replacing your air filter. We offer discounts and give preventative maintenance customers priority scheduling if an issue arises during our busy season. Give us a call today at 469-444-0628 and we will assist you in AC service in Lewisville, TX

Read More

How Often Should AC Contactors Be Replaced?

The AC contactor regulates the electric flow into the unit. The contactor cuts off the power when you turn off your air conditioner. Similarly, when you turn on the air conditioner, the contactor allows electricity to power the system and is reset when your home reaches the temperature set on the thermostat.

When should you replace your AC contactor?

Capacitors typically last several years, but if you keep the same air conditioner for more than ten years, you’ll need to replace them at least once. A start capacitor is installed in many outdoor units to assist the AC in starting up, whereas a run capacitor keeps the system running after it starts up.
However, your system may only have one capacitor in the outdoor unit, and some models may also have a capacitor for the indoor blower motor. Capacitors resemble large batteries, but they are connected to wires within your air conditioning system.

Unfortunately, you can’t simply insert a capacitor into a slot and snap on a plastic cap, because it is not the same as a battery. In this case, you would need the services of a professional for AC service in Lewisville.

How do you know if you need to replace a capacitor?

Your air conditioning contractor in Lewisville claims that your capacitor has failed, the following points would indicate why:

  • The voltmeter indicates that there are insufficient microfarads. Every capacitor is rated in microfarads. For example, yours could be rated for 35 microfarads with a plus or minus ten range. If it falls below 25, your HVAC technician will know it’s time to replace it.

  • When the capacitor is far gone, it will swell up. It will appear as if someone crammed too much material into the tube, causing it to bulge at the sides.

  • Although this does not always occur, bad capacitors frequently leak oil.

How do you test an AC contactor?

  • Turn off the power to the air conditioner before removing the contactor. Perform the test at both the thermostat and the breaker level. After turning off the power, proceed to the condenser unit.

  • The AC’s control panel is located on the side of the unit that is connected to the wires. Remove the side cover with a screwdriver. Several colored cables are connected to the contactor.

  • Remove the contactor from the condenser unit’s side (while still connected to wires). Continue by removing the wires.

  • Use a multimeter to test the contactor and set it to the OL position. Connect the multimeter to the contactor’s low volt terminals on both sides.

  • If the contractor is operational, the multimeter will read between 5 and 20. If you get a lower or no reading, the contactor is broken.

  • Replace the condenser’s side paneling and turn on your air conditioner. If you are still unsure how to do it, call a skilled specialist for AC service in Lewisville.

When an HVAC technician says the capacitor needs to be replaced, you’ll know now what to ask. Ashford Mechanical provides a budget-friendly preventive maintenance service. Also, if your air conditioner isn’t working correctly, call us at 469-444-0628 or leave us a mail here to schedule an appointment with an air conditioning contractor in Lewisville!

Read More

How Long Does it Take to Fix a Broken AC?

Most people are unlikely to understand the inner workings of a home air conditioning system, which is fine most of the time! We need to know that our air conditioners provide cool, dehumidified air during the hot summer months. We also understand that no one wants their air conditioner to stop working suddenly during the hot summer days. A broken compressor could be the source of your air conditioner’s failure.

How long does it take to repair an air conditioner?

Before delving into how long it takes for AC repair in Lewisville, keep in mind that it also depends on the issue at hand. An air conditioner replacement will take between 4 and 8 hours on average. If you replace both your furnace and air conditioner simultaneously, the job will take 8 to 14 hours. The time required depends on these factors:

  • Broken ductwork: Repairing damaged or leaky ductwork can take days rather than hours. This is because the problem areas must be located through walls. Larger homes or structures may take weeks rather than days.

  • Strange sounds or banging noises: Do you hear odd sounds or banging noises coming from your air conditioner? The good news is that replacing a belt only takes a few hours. While this type of AC repair in Lewisville is minor, ignoring it can be a significant problem.

  • Dirty filters: To replace the air filter, follow the manufacturer’s instructions. The frequency you must change will vary depending on the manufacturer. Checking for light passing through is easy to tell if it’s time to clean it. If there is no light, it is time to change the bulb.

  • Compressors: If the compressor fails, the air conditioner will not be able to cool your home. When there isn’t enough refrigerant, your compressor can overheat and stop working. If there is too much refrigerant, it will return to the compressor and cause it to fail.

  • Refrigerant: If your air conditioner’s coolant begins to leak, it will not function properly. The temperature may fluctuate as a result of this. The location of the leak will also affect the cost of the repair. Allow a trained specialist to inspect the situation to help prevent this from happening.

How often should one have the air conditioner serviced?

It’s good to have an air conditioner professional inspect your system to postpone AC replacement in Lewisville. They should come at least once a year to ensure that everything is in working order. Even if you don’t believe there is a problem, you should have them come and look.

What is the need for AC inspection?

HVAC professionals will inspect your AC to ensure it is in good working order. They can also avoid breakdowns and save money on your energy bill and will work hard to ensure that your air conditioning unit is in good working order when you need it the most.

Ashford Mechanical provides prompt, high-quality AC repair services. Our technicians are skilled in repairing common AC issues, from broken compressors to AC replacement in Lewisville. Contact us at 469-444-0628.

Read More

Ways to Avoid Air Conditioner Breakdowns

Air conditioners are an absolute necessity in a place like Texas, with average summer temperatures at some places reaching as high as 100 degrees fahrenheit. Such climatic conditions call for rigorous air conditioner usage for a major part of the year, making any appliance susceptible to breakdowns or other operational defects. If you have an appliance at risk of such unforeseen mishaps, we have put together a list of measures you can adopt to avoid such inconveniences. 

  1 . Tend to your appliance’s filter more often 

Air filters of any HVAC play a significant role in its operation. Most owners often do not direct their attention to their filters if something goes wrong with their appliance’s operation. With increased usage, air filters have to clean the incoming rate at twice the normal rate. It makes them clog up faster than usual, so people with increased air conditioning usage should consider cleaning or changing their air filters more often.

Under normal conditions, air filters should be changed or cleaned once every month. However, with increased usage, they are likely to require more frequent cleaning and tending to. Since an air filter is one of the simplest parts of an HVAC, you should not wait for the next scheduled maintenance service and change or clean them yourself. 

   2 . Look after the outdoor AC unit 

Outdoor air conditioning units often do not get as much attention because they remain out of sight of the owners. Although outdoor units are designed to stand rough weather conditions, you must ensure that it has ample space and a flow of fresh air for an uninterrupted supply of conditioned air for you and your family. 

You may clean the outdoor unit once every couple of months with a regular water hose to rid the fans and other moving dust and debris deposition components. 

   3 . Keep the air vents and registers free of obstacles 

The vents and registers of your air conditioning system are responsible for a continuous stream of air into your household. Whether they are located near the ceiling or above the ground, you must ensure that no furnishings, indoor plants, or other household items are blocking their path of airflow. Doing so may cause slow cooling of the room, making your air conditioning system work harder, overheat, and break down more frequently. 

   4 . Schedule regular maintenance services for your appliance

An imaginative professional service is one of the best ways to ensure that your air conditioning system keeps functioning efficiently and is free of any possibility of breaking down in the future. Maintenance and air conditioning tune-up services inspect your appliance for defects, leaks, and other common operational defects for a quick fix or replacement. Early detection and resolution of such problems ensure that your appliance keeps functioning at its maximum efficiency without falling prey to such unforeseen damage. 

A family-owned and operated company, Ashford Mechanical has over ten years of experience in the industry. With NATE certified and a skilled team of technicians, we are best suited to deliver AC replacement in Lewisville, TX, and all other kinds of HVAC services. Visit our website to schedule a visit or know more about our sources.

Read More

Tips for Proper Care of Your Air Conditioning System

Your air conditioning system contributes significantly to your monthly electricity consumption. Your air conditioning system is likely to be used more than any other device during the summer to keep your house cool and comfortable throughout the day.

To properly maintain your AC, let’s first go over some of the most common AC problems. Most of the concerns with your air conditioner can be attributed to the following factors:

  • Strange noises
  • The air conditioner isn’t cooling
  • The cost of power is regularly increasing for no apparent reason.
  • The air conditioner is blowing hot air
  • The air conditioner is emitting unpleasant odors

Air conditioner maintenance and AC repair in Lewisville are required to avoid these frequent AC issues and guarantee that your system operates at peak efficiency.

Tips on to keep your air conditioner in good working order

1. Changing the air filter

Maintaining your air conditioning system by changing the air filter regularly is the most important thing. A clean air filter prevents dirt and dust particles from entering your home. However, an air filter will only function effectively if it’s not clogged with excessive particulate matter. Having dirty air filters can exhaust your air conditioner more than necessary, but they can also lower the quality of the air in your home.

2. Keeping the coils clean

Cooling your home and absorbing heat is one of the functions of your air conditioning coils. Dirt accumulates on the coils over time, reducing their ability to absorb heat. Your air conditioning system has to work harder to cool your house.

Keep your coils clean to avoid putting undue strain on your AC. This can be done in many ways, but we recommend beginning by clearing away any debris around the condenser unit.

3. Examining the condensate drain

Condensate drains are an important part of the air conditioning system since they allow the condensation created inside the system to drain outdoors. Clogged condensate drains can hinder drainage over time.

If you notice that water isn’t draining properly from the condensate drain, unclog the obstruction or contact your local AC technician for AC service in Lewisville. It will help ensure your AC is functioning efficiently and you stay comfortable.

4. Keep it cool

Cooling down your air conditioner may seem counterintuitive. Still, the truth is that it increases the efficiency of your system and allows it to last longer without needing to be repaired. Your air conditioner unit needs to work extra hard to keep your room cool throughout the summer; keeping it in the shade can help lessen its burden and prevent overheating.

5. Keep it in the shade

Apart from keeping it in the shade during the hotter months, it’s also a good idea to cover the air conditioning unit entirely while it’s not in use. This encompasses the fall, winter, and early spring months. During the coldest months of the year, you may purchase a basic tarp or another form of heavy cover to keep it sheltered from the weather.

Apart from the suggestions mentioned above, you should regularly get your air conditioner serviced. Hire a trustworthy service company like Ashford Mechanical for the finest outcomes.

Read More

3 Reasons Your Furnace Cycles On And Off Frequently

Have you ever felt that your furnace is turning on and off quite frequently? If you see any such issues, then your furnace is short cycling that needs to be corrected. Neglecting these issues will result in high electricity bills and damage to the furnace. Rather than investing in high maintenance payments, schedule an HVAC tune-up by calling your furnace installation in Lewisville. The HVAC experts will meticulously inspect each part of your furnace, which will help you maintain its efficient performance.

Reasons For Short Cycling In Your Furnace?

There could be a few reasons behind frequently turning on and off of the furnace. Contact your HVAC contractor and let them observe the furnace closely and fix the issue. Or else, you might need to plan a furnace replacement in Lewisville. The most commonly found reasons for short cycling includes;

  • Obstruction in Airflow

If your furnace is shutting off quite repeatedly, there might be some issue in the air circulation. Look for any blockage in the air pathway of your furnace and notify a trustworthy company of furnace installation in Lewisville to book a service. There can be several other problems that can lead to decreased airflow.

For example, an air filter with a clog can obstruct the air circulation and cause heat retention. This retained heat will overheat your furnace. To improve the performance of your heating unit, keep cleaning and changing the air filter and save your furnace from short cycling.
A dirty blower wheel can also be a reason for the rapid turn-off and on of your furnace. Furthermore, if there is some blockage in the vents, you should immediately clean it to avoid short cycling of your furnace.

  • Defective Thermostat

A programmable thermostat controls your entire heating system automatically. If your furnace is turning on and off pretty frequently, then you must check the settings of your thermostat and reset them. Additionally, there might be some other defects in your thermostat, such as damaged wiring or old batteries. If resetting the temperature and changing batteries is not enough, then book a service from your furnace installation in Lewisville to fix it up.

  • Faulty Flame Sensor

A flame sensor helps in accessing the flame in your furnace when the gas valves are open. If there is no flame, then the flame sensor will automatically turn the gas valves off. If your flame sensor is dirty and corroded, it will not detect the flame and turn the gas valve close. It will cause frequent shutting down of your heating unit. Schedule a heating repair from your furnace installation in Lewisville and get a properly working flame sensor.

Ashford Mechanical Commercial and Residential HVAC is a certified company. We consider your problems as ours and try to give you excellent quality HVAC solutions for them. Dial (469) 444-0628 and get solutions for your HVAC issues all at once.

Read More

Why Is My Furnace Reset Button Not Working?

A furnace is a part of our life and our family. Knowing how it works and understanding its requirements is our responsibility so that it can keep us warm in return.

Besides knowing the basics of a furnace, you need to know the features and functions that can help you out in times of emergency. You must learn to use the reset button, which can save you a lot of trouble provided you follow the necessary steps and precautions while doing it.

How To Reset The Furnace

It is a simple process, whether you have an electrical unit or unit run by gas. Try looking into the manual if you cannot find the button. The following steps will help you out in the process.

  • Switch off the power button. However, if your furnace doesn’t have one, put down the circuit breaker and locate it inside the blower housing.
  • If you have a gas furnace, switch off the gas control while turning down the thermostat setting. Keep the pilot gas supply line open, and turn off the main supply. For furnaces with sealed pilot compartments, press the red button right under the pilot or seal to start and turn on the power. Open the main gas supply and press reset. We advise holding it for at least 30 seconds.

Reasons Why The Reset Button Is Tripping,

Don’t panic once you fail to reset your furnace. Try again, and if it doesn’t work, consider looking into the following issues:

  • Common in gas and oil-run furnaces, constant loss of fuel might be the reason why your reset button is tripping.
  • Blocked pipes, ducts, valves, and closed supply lines.
  • Sudden shutdown due to untimely maintenance.
  • Old air filters that haven’t been cleaned or replaced in a long time, straining on your furnace.

If all this is too complicated, do not hesitate to call an expert for furnace repair in Lewisville. Better careful than sorry!

Furnace Restart Button Solutions

You need to first troubleshoot the furnace restart button before coming up with a solution. Once you know where the problem lies, fix it accordingly.

  • Allow the furnace to completely shut down and cool off before restarting.
  • Unclog gas supply or fuel supply lines that might be jammed.
  • Replace dirty air filters that might be blocking airflow.
  • Clean flame sensors.

Call For Professional HVAC Experts.

Trying out DIY methods does not usually work here. It might worsen the condition of your unit since only an expert can look at where the problem truly lies. Find reliable furnace repair in Lewisville with great maintenance and service benefits. We focus on improving the quality of your air and domestic life.

We have a wide range of brands that guarantee to never make you go through the troubles of changing climate conditions. If you already have a unit that needs fixing, furnace service in Lewisville from Ashford Mechanical is the best HVAC contractor in town, as approved by community members. Our honest and reliable services are available by calling us at (469) 444-0628 or scheduling an appointment online.

Read More

How To Reset The Heating System?

Homeowners feel the need to reset their heating systems because they might feel it isn’t functioning properly. Resetting the thermostat and the furnace helps. But if the problem persists, you need to call for professional help. However, before contacting an expert, you should try to reset the thermostat and your unit.

The Need For Furnace Resetting

The reset button is not going to work all the time, but circumstances that call for such a resolve are:

  • There was a power outage or heavy voltage switch in your electricity supply.
  • The furnace was experiencing inadequate oil or gas supply.
  • You have kids and pets who must have done something. Unnecessary with the furnace in your absence.
  • You just fixed an issue and want the heating unit to restart efficiently.
  • A professional advised you to reset it.

Where Is The Reset Button?

Most reset buttons are located inside your blower compartment. Before pressing the reset button, there are a few things that you need to do. Switch off power, gas, or oil supply to your furnace. Look at the circuit breaker to efficiently allow your heating unit to shut down.

Easy Reset Tips

Sometimes, a task as simple as resetting your HVAC unit becomes difficult. This happens when you cannot locate it or fail to do it despite the button being right in front of you. Ask yourself, have you pressed the button and held it down long enough? Sometimes the five-second hold does not help. Try the 30-second hold.

  • Look into the manual for specific settings
  • Wipe and unclog filters before switching the furnace back on
  • Find thermostat reset instructions

If you don’t have a manual, copy the product and model code to search online. With Ashford Mechanical as the most efficient and reliable heating repair in Lewisville, you no longer have to worry about repairs. We will be right at your doorstep in case of any untimely furnace breakdowns.

Digital Thermostats: A Guide

Digital thermostats are great to use, the new modern way of keeping yourself warm and comfortable while following recent trends. These are easier to reset because everything is presented right in front of you. However, beware of the factory reset button. It will forget all default settings, regarding specific temperatures and timings, besides restarting the HVAC system.

Batteries are the lifelines for digital systems. Taking them out or rubbing them, or putting them back in reverse will do the trick. It doesn’t work all the time, but if it does for you, this trip was worth reading! If it doesn’t, simply change the batteries, and the heating unit will be good to go.

Still Cannot Reset Your Heating System?

Sometimes furnaces can be difficult to operate and even more complex to fix. Leave this task to Ashford Mechanical. We serve residential, commercial, and new construction areas with our best professional services. Heating repair in Lewisville has never been easier! You can even grab some wonderful offers on our website or call us at 469-444-0628. We give you a pocket-friendly estimate that is well suited according to your requirements.

Read More

How Much Does It Cost To Replace A Limit Switch On A Furnace?

Goodman is a household brand when it comes to home heating and energy-efficient domestic comfort. Goodman stands up to all the energy-efficient technologies, incredibly durable components, and precision manufacturing.

The new technology and innovation make it possible for our experts to set up a cleaner and healthier system in your home or office space.

The reset button aims to turn off the furnace before it strikes your circuit. It may require it if the furnace grows too hot or if the electrical system is disrupted in any way. In most cases, the problem is limited to the reset button popping.

The factors like the location of your house or the size of your house do not impact Goodman furnace, and Goodman most likely has a gas furnace to keep yourself warm and comfortable.

Learn more about the importance of having the appropriate processes for furnace repair in Lewisville at an affordable price. Get your house tested now and start breathing healthier.

Where Is The Reset Button Located?

If your house has both central heating and central air, you should be able to locate the reset button on the blower motor. Because it’s generally painted red or yellow to make it stand out, you can know it’s the reset button.

The circuit breaker is easy to locate. Raise the blower chamber lid to gain access to the blower rotor and power. Just on the side of the blower motor, look for a power button. If you find the restart button has been pulled out, click it.

The Reset Button on Goodman Furnaces

Yes, like in any other furnaces, there is a reset button on Goodman Furnaces. The reset button protects the house from overheating. It is designed to reset the unit and protect it from overheating.

How Do I Reset A Furnace’s Switch?

  • Find the heating duct in your furnace.
  • You should find the white limit switch.
  • Examine each arm to determine the settings.
  • Determine the component (setting) that is sandwiched between the two arms.
  • Adjust the temperature of the middle element to about 105 to 115 degrees Fahrenheit.

The continual operation of the furnace’s compressor is the most typical symptom of a faulty limit switch. The limit switch prevents the fan from turning on until the warm air has reached the desired temperature, and it also prevents the air from cooling below a particular temperature.

Why is Goodsman The Best?

Goodman has good goodwill in the household. Goodman specializes in high-quality, user-friendly, and cost-effective systems. If the Goodman air conditioning system breaks down, a simple system reset is generally all that is required to get it back up and running.

The total installation expenses for a Goodman gas furnace may look high from $2,400 to $3,700. However, they are more reliable, safe, and effective when compared to others in the market.

Conclusion

The best and easiest approach to reset the Goodman air conditioning unit is to reset the circuit. However, not everyone is comfortable doing heater repair in Lewisville on their own. In such a case, you can contact us at ashfordmechanical.com.

We’ll collaborate with you to discover a solution that maximizes furnace repair in Lewisville and service quality. We listen to any concerns, get right to work, and deliver your desired products. Get in touch with us to learn more about our services!

Read More

Is There A Reset Button On Goodman Furnace?

Goodman is a household brand when it comes to home heating and energy-efficient domestic comfort. Goodman stands up to all the competition in energy-efficient technologies, incredibly durable components, and precision manufacturing. The new technology and innovation make it possible for our experts to set up a cleaner and healthier system in your home or office space.

The reset button aims to turn off the furnace before it strikes your circuit. It may require it if the furnace grows too hot or if the electrical system is disrupted in any way. In most cases, the problem is limited to the reset button popping.

The factors like the location of your house or the size of your house do not impact Goodman furnace, and Goodman most likely has a gas furnace to keep yourself warm and comfortable. Learn more about the importance of having the appropriate processes for furnace repair in Lewisville at an affordable price. Get your house tested now and start breathing healthier.

Where is The Reset Button Located?

If your house has both central heating and central air, you should be able to locate the reset button on the blower motor. Because it’s generally painted red or yellow to make it stand out, you can know it’s the reset button.

The circuit breaker is easy to locate. Raise the blower chamber lid to gain access to the blower rotor and power. Just on the side of the blower motor, look for a power button. If you find the restart button has been pulled out, click it.

The Reset Button on Goodman Furnaces

Yes, like in any other furnaces, there is a reset button on Goodman Furnaces. It is designed to reset the unit and protect it from overheating.

How Do I Reset A Furnace’s Switch?

  • Find the heating duct in your furnace.
  • You should find the white limit switch.
  • Examine each arm to determine the settings.
  • Determine the component (setting) that is sandwiched between the two arms.
  • Adjust the temperature of the middle element to about 105 to 115 degrees Fahrenheit.

The continual operation of the furnace’s compressor is the most typical symptom of a faulty limit switch. The limit switch prevents the fan from turning on until the warm air has reached the desired temperature, and it also prevents the air from cooling below a particular temperature.

Why is Goodsman The Best?

Goodman specializes in high-quality, user-friendly, and cost-effective systems. If the Goodman air conditioning system breaks down, a simple system reset is generally all that is required to get it back up and running.

The total installation expenses for a Goodman gas furnace may look high from $2,400 to $3,700. However, they are more reliable, safe, and effective when compared to others in the market.

Conclusion

The best and easiest approach to reset the Goodman air conditioning unit is to reset the circuit. However, not everyone is comfortable doing heater repair in Lewisville on their own. In such a case, you can contact us at ashfordmechanical.com. We’ll collaborate with you to discover a solution that maximizes furnace repair in Lewisville and service quality. We listen to any concerns, get right to work, and deliver your desired products. We look forward to working with you!

Read More